How to connect the electric stove Bosch
Bosch Power Plate are worthy rivals of gas stoves. Demand for them is incredibly high. Still would! Virtues have electric stoves much: their use safer (does not have to be the case with an open fire), do not burn oxygen, and cookers heating temperature is easy to control. But there is one important condition - electric stove must be connected correctly.
You will need:
- wire; - Electric with the instruction; - Screwdriver with the indicator; - power socket; - Plug.
Instruction how to connect the electric stove bosch
Unzip the purchased electric stove. Carefully read the instructions attached to the unit: it sets out the requirements for the safe connection of cookers. Carefully inspect the plate to detect obvious damage and defects.
Check guard. To connect the cooker, opening the cable coming into the apartment should be copper with a minimum size of 6 mm2. In addition to be an introductory Machine (40-50 amperes). At the same time, it must necessarily be provided by means of tripping the RCD.
Note that the electric plates sold as a cable for connecting the unit to a power outlet, and without it. In view of this, there are two ways to connect electric cookers: a direct connection, ie, without a power outlet, and the use of the power outlet.
If the connection is made directly to electric stoves, for the beginning get on the back of the cabinet wiring (there may be from three to five). For example, there are found three phase conductors. Data wires connect the phase wire from the panel: black phase shield wire to terminal L, blue - to the terminal N, and the yellow-green empty on the ground.
If the connection is performed using the cooking appliance power socket, it can be two versions of the connection unit. First, install the cable from the electric stove, a fork, which would correspond to an existing outlet in the kitchen. But there is a caveat: the fact that the power outlet is still the Soviet era is not enough reliable, so there is a risk that the power supply is unstable (the reasons are different: the old socket shattered, bad contacts, etc.), which will lead to premature failure of the appliance. Second, replace the old power outlet at the new Euro standards, and on the cable set plug into this socket.