How to install water heater
Centralized hot water supply has not in any terrain. And in the cities of maintenance work and accidents can lead to a prolonged shutdown of hot water. Today, therefore, not be superfluous to install a water heater in the house.
Instructions on installation of a water heater supplied with the product. It contains important information about the rules of connection and installation. Disregarding these rules may result in damage to the device before the start of its operation or the occurrence of accidents in the process. Select a location for installation of the heater. It must meet all the requirements set forth in the installation instructions. Be sure to note that the selected site can be easily and safely carry out laying of a separate three-core power cable, water supply pipes and distribution pipes of hot water to the taps. In this case, if the wall mounted water heater storage-type, having a sufficiently large amount, check the strength of the wall to which it is attached. Prepare the site chosen for the installation of the heater. If the device should be mounted on a wall in accordance with the instruction mark attachment point. Then, using the punch, or drill on a marking drill holes in the wall, screw in the anchor bolts or they drive in plastic dowels and screw spikes. Set the water heater. Wall unit firmly lock fasteners and check the mounting reliability. With respect to outdoor unit Check the absence of significant side-roll, using a spirit level. Connect the water heater to the power supply, paving of the electrical panel to the device a separate three-wire cable. His section and select the type of guided indicator of the maximum current consumption. Recommendations to the power wires are often given in the installation manual. Connecting the heater is carried out through an automatic fuse. Be sure to ground the unit by connecting the corresponding core wire and connect it to the grounding bar in the electrical box. Connect the water heater to the water supply and water points. Follow the installation instructions. Today heaters are used to connect both flexible and rigid metal, metalloplastovye or polypropylene pipes. Flexible hose is considered unreliable, and its use should be avoided.