How to make the most of the awning frame
At its core, the tent - it is a simple canopy. The main advice for those who want to make a tent with their hands - well with the goals and objectives of the construction. If this carport, then choose inexpensive materials, but strong, and if the tent is designed for tea parties in the country, the structure must have a thorough beginning. In any case, you must first select the site for the tent, make an outline drawing and determine the choice of material that you'll use during the construction. Make a tent with his own hands is not very difficult. Its main elements are the frame and the tent itself, ie roofing.
Instruction how to make the most of the awning frame
Select the material for the manufacture of the frame. The modern market offers a wide range of building materials that can be used to make the frame for an awning. This wooden beams, aluminum pipes, metal fittings, angles and the like. The simplest thing that you can use as a tent - a special rack with mounting system.
Mark the portion over which is stretched a tent. Pegs note space for racks. Dig in place a peg hole depth of at least half a meter, put them in the rack, which will be fixed fastening element. Fill the hole wet ground (if the structure is designed for a long time, it is possible to pour cement) and tamp well.
Let stand for a day, and then proceed with the installation of crossbars. Adjust the side tabs on the rack and in turn insert the guides. Here you need help, otherwise there is a risk that the design simply fall under its own weight.
Keep the guide in the center of design and secure fastening element ( "Centrists"). If the central element is not provided for the construction of an awning, easy to fasten rails at the corners. Tighten. You get a rack, sealed top strapping. Check the reliability of the design and pull the fabric.
The canopy can make and polycarbonate, but in this case to fabricate the frame 10-15 cm smaller than the stacking plate, and as the material for the struts take the aluminum. If you need a tent round shape, then use metal profiles. Attach them to the rack using the screws and parts, and polycarbonate prisverlivayte on the screws.
For tents in the form of arches using long metal profiles. Dug one end of the profile of the ground and carefully fasten it there at an angle of 45 degrees. The other end dug into the pre-planned place. It will turn the arch. For stability, use the side rack-support height meter and a half. Please note that you will need a minimum of 4 core structure, or tent will be shaky.