How To Connect Two Tvs To Satellite Antenna | Hi-Tech

 

 

Hi-Tech

How to connect two TVs to satellite antenna

The world stepped on the path of progress far enough. Previously, only a few decades ago, about the TV could only dream. Today there is an opportunity to buy a few TVs for one family. Each TV has certain characteristics for making the broadcasting channels. Take more and more number of channels allows a satellite dish. You can choose the package of channels, broadcast conditions, connect the satellite antenna. In addition, today there is the possibility of directly to a satellite dish to connect two televisions. To conduct such a connection can be independently in the presence of some pretty basic skills of working with electronics.

How to connect two TVs to satellite antenna

You will need:

Mountain GPS antenna (plate), Ku band converter, receiver, cable and mounting plates selection space, the primary skills of working with electronics.

Instruction how to connect two TVs to satellite antenna

Step 1:

When deciding to connect two televisions to a single satellite dish is to decide on a package of channels. One option could serve as Tricolor. It broadcasts from Eutelsat W4 satellite in a good transfer. The satellite antenna may be a diameter of 60 cm, the blanket type. It antenna positioned vertically. This allows you to receive the signal well.

Step 2:

Converter range and receiver are used for signal conversion. It goes from a higher frequency to a lower frequency. When deciding watch scrambled channels will require the installation of additional equipment - the decoder. The receiver connects directly to your TV via antenna input.

Step 3:

When choosing a cable special attention should be paid to its quality. Not worth saving. It is up to the high quality of the signal depends on the amount of lost data. It should be taken into account immediately broadcast on two television sets. It can be made from one or two connectors.

Step 4:

On the antenna is equipped with two tuners. The variant of the heads on the antenna connection. To it must be connected via the «Switch» so-called double for signal separation. It is usually from one antenna input and two outputs for TVs.

Step 5:

After all the operations you can set via the antenna satellite Internet. His speed is much higher than usual.