How To Disassemble The Joystick Xbox 360 | Hi-Tech




How to disassemble the joystick xbox 360

The Xbox 360 is one of the most popular consoles of recent times. It is equipped with a wired or wireless controller that gets dirty very quickly because of its snow-white coating. The device literally attract dust that affects its performance. Therefore, you need to periodically purge to gamepad served as long as possible.

How to disassemble the joystick xbox 360

You will need:

- thin Phillips or flathead screwdriver.

Instruction how to disassemble the joystick xbox 360

Step 1:

Remove the battery. Remove the back of the joystick using a Phillips screwdriver, small size. It is necessary to unscrew the 6 screws that are on the panel itself, and one screw, which is located under the label of the battery slot. Put the screws so that they do not lose.

Step 2:

Carefully remove both cover and remove the chip joystick. Remove the top panel (under which there are triggers) and the lower part of the gray plastic. Elastic bands on the buttons is not shoot.

Step 3:

Turn off the crossbar controller, which is fastened by 2 screws and latches secured. First, twist the screws, and only then try to free the metal latch using the same screwdriver. Then you can push the crossbar.

Step 4:

Remove the rubber bands from the four-way controller. To remove the side of the trigger, release it on the plastic part, which is inserted into the appropriate slot button mechanism. Then fold the two side latch, tilt the trigger and remove it, then remove the spring itself.

Step 5:

Joystick dismantled. Clean all parts, replace the necessary parts. Assemble the controller in reverse order.