How to flash the memory of the TV
Firmware TVs rather complicated process that requires you to not only the availability of work experience with the reinsertion of chips, but also special equipment. Before flashing the mandatory service manual download to your model.
You will need:
- screwdriver; - Programmer; - a computer; - Firmware program; - Service manual.
Instruction as a flash memory of the TV
Disassemble your TV and get the chip to his memory. To do this, use service management, it is applicable to your particular model, otherwise you risk to break the TV. Get Service Manual quite difficult, moreover, the problem is often compounded by the fact that often it is only at the manufacturer's language.
Purchase a special programmer for the chips. You can find it in the stores of your city or radio to collect yourself, if you have the skills to work with such devices. For this pre-load circuit from the Internet.
If possible, purchase a replacement chip for your TV. It is convenient to save it in the new version of the firmware program. And if after a software update that something goes wrong, you can simply replace it with the old one, without changing the firmware.
If you still can not find the removable chip for your TV, connect the programmer to the old, run on your computer, download the software, merge the information in the computer's memory. This should be done without fail, since the software update is not always the best way affects the operation of the device.
Reprogram the TV's memory chip and insert it back into the device. Check the correct operation of every moment on the use of the TV. If you are satisfied, secure the lid and leave it unchanged. If the firmware update you observe unstable operation, replace the old chip on or sew his older version.
If you have not previously encountered with PG firmware software, contact the service center of your city to get help from experts. Do not reflash TV unnecessarily and rarely try to take it apart.