How To Install A Cartographer | Hi-Tech

 

 

Hi-Tech

How to install a cartographer

It is often very difficult to see and explore the bottom of the presence of a thick layer of mud, which obscures its surface. Electronic charts will allow you to explore the smallest pebble bottom of the pond you choose, whether it's a lake or river. This is done for various purposes: for fishing or for the construction of the pier on the river.

How to install a cartographer

Instruction how to install cartographer

Step 1:

In the domestic roar are a lot of mappers for all tastes, so that each person can choose for themselves the best option, which will perfectly cope with the tasks assigned to it. In addition to studies of the bottom of the rivers there are cartographers, which are designed to study the earth's surface. Set this type of cartography, as a rule, on airplanes or satellites, plowing the expanses of space in Earth orbit.

Step 2:

To install the surveyor on board a motor boat or vessel, first of all, choose the place where you will install it. If it is a ship or boat, the ideal place to install a cartographer housing management console. Sensing elements shall be submitted to the bottom, since this position is easiest to scan the bottom of the reservoir.

Step 3:

There is often installed sounder, which measures the depth. On a small boat surveyor best set on one of the sides. To do this, a special bracket of high and preferably stainless steel. Then powerful bolts attach it to the boat and start to use it. Carefully read the instructions for use cartographer and thoroughly examine how it works. Then, in case of damage or failure, you can easily return it to operation.

Step 4:

The range of depths that can scan cartographer, ranges from 1.5 to 450 m. So any big fish will not go unnoticed. Also well-designed noise reduction system, which is created by the waves splashing against the side of the boat. The screen is capable of very rapid changes, due to the fact that the device runs on of hexadecimal processor with a clock frequency of 24 MHz. It is also equipped with electronic cartography ports for connecting devices compatible with GPS and DGPS standards. In general, the work of a cartographer will allow you not only to become familiar with the device of this apparatus, but also automatically learn the basics of science such as mapping.