How To Restore Navigation | Hi-Tech

 

 

Hi-Tech

How to restore navigation

The current situation in the country is very critical ways: widespread traffic jams, constant traffic accidents and more. Therefore, motorists have to be installed in their car navigation satellite system - GPS-navigator. However, navigators, like other modern phones with integrated GPS-receivers signals (smartphones, phones), are prone to breakdowns, in particular, meetings firmware.

How to restore navigation

You will need:

file with the appropriate firmware version.

Instruction how to restore navigation

Step 1:

Restoration of car GPS-navigators can be done in two ways: by using the new firmware download and without flashing through simple SOFT-Reset. As regards the first method, everything is more or less clear, as the browser is completely analogous flashing flashing ordinary cell phone, smartphone or communicator. To do this you need to download from the Internet to a computer file with the appropriate firmware version and unpack it with razarhivatorschika.

Step 2:

After that you must extract from the Navigator MicroSD-memory card, insert it into the reader and copy the root directory of the downloaded firmware file. Then, remove the card from the device and insert it back into the navigator.

Step 3:

Now you need to turn on the device and wait until the dialog box asking whether to start re-flash. After your approval to start flashing your car "friend." Upon completion of the installation, click "OK", and then on the navigation screen, a window will appear with further instructions and guidance. This navigator restoration will be completed.

Step 4:

Program Navigator reset to factory settings, which were originally in the navigator, called SOFT-Reset. To restore the GPS-navigator so you need to go to ResidentFlash, and then JBSA4UI, where jbssetting.ini and jbssetting.ini.bak files in line DefaultSetting = 0 to change the "0" to "1".

Step 5:

Then, restart the browser and go to the "Settings" folder - "info". At the bottom you will see three icons: «USB Settings", "The Way of navigation" and Werkseins ..., the latter of which is the SOFT-Reset, ie a return to factory settings. Click on it. After this message appears: "Are you sure you want to restore the factory settings?". Click "Yes". After a while, return the original settings, therefore, your device will be restored.